DTG printing works by applying inks directly to T-shirt fabrics, in contrast to methods that apply DTG inks indirectly using screens or paper. It does this by using a modified type of inkjet printer that can print water-based inks known as aqueous inks. To apply these inks, DTG printing uses a four-step process:

1. Prepare digital art files

2. Pretreat and cure the t-shirt

3. Print on the t-shirt

4. Cure the ink

Let's break down these steps:

2. Pretreating and curing t-shirts

The type of ink used by DTG printers works best with natural fibers such as cotton, bamboo, and hemp. To ensure the ink displays correctly, DTG uses a pretreatment machine before printing a t-shirt. Pretreatment applies a liquid solution that keeps white ink from soaking into the shirt and discoloring it while also preventing it from smearing or mixing with colored inks.

After the pretreatment solution has been applied, it is cured with a heat press or air dryer to make the t-shirt printing surface flatter. Fibers such as cotton normally stick up. Curing flattens the fibers to provide a smoother surface for printing.

3. Printing on t-shirts

After pretreatment, t-shirts are readied for printing by placing them on a flat platform called a platen. The platen holds the t-shirt in place to keep it flat and aligned in the right spot for inks to be applied. T-shirts can be aligned correctly to platens by lining up their neck collar, shoulder seams, or side seams on shirts that have them. Once a t-shirt has been aligned on a paten, it can be printed by feeding the paten into the printer.

4. Curing ink

After a t-shirt has been printed, the ink must be cured to affix it to the garment properly and ensure durability through repeated washings. Curing may be done with a heat press or forced air dryer.